Air-Cooled Permanent Magnet Synchronous Motor

Motor

Products and Services/R&D

Power Converter

Motor

PLC

Air-Cooled ED Motor (IPM Synchronous Motor)

Toyo Denki's ED motor (Eco-Drive Motor) are ultra-high efficiency, compact motor, making them both economical and ecological

Catalog: ED Motor（22.2MB）

EDM Permanent Magnet Synchronous Motor Instruction Manual （1.6MB）

ED Motor (IPM Synchronous Motor) （4.8MB）

Features and Functions

High Efficiency

The efficiency of the ED motor alone is approximately 2% higher than the IE3 Premium Efficiency standard value, and approximately 5% higher than that of an inverter-dedicated induction motor (hereinafter referred to as "UF Series inverter-dedicated IM").

Compact and Lightweight

The center height is 2 frames lower at comparable output than our UF Series inverter-dedicated IM.
The motor weight has also been significantly reduced.(32 to 57% reduction compared to our UF Series inverter-dedicated IM)

Low Noise

低騒音

By reducing total motor loss, motor cooling air volume is reduced, and the noise level is even lower than our UF Series inverter-dedicated IM.

Low inertia

低慣性

Moment of inertia is low, and the motor boasts outstanding acceleration and deceleration characteristics. (30 to 75% reduction compared to our UF Series inverter-dedicated IM)

Reduced Maintenance

Negligible loss at the rotor side means low bearing temperature, and the life of sealed grease is approximately 1.5 to 2 times (approximately 32,000 to 47,000 hrs) that of our UF Series inverter-dedicated IM, allowing maintenance work to be reduced.

High-Performance Vector Inverter

A dedicated inverter equipped with revolutionary built-in PLC and monitor functions controls the permanent magnet motor, enabling flexible control.

CE marking

Conforms with CE marking required for the sale and distribution of products in the EU region (including Turkey).

Harmonized Standards

Directive Harmonized Standards
LVD (Low Voltage Directive)
2014/35/EU		 EN 60034-1:2010
EN 60034-5:2001
RoHS Directive
2011/65/EU, (EU) 2015/863		 EN IEC 63000:2018

Standard Specifications

Base speed 1200min-1, 1500min-1, 1800min-1
Rated voltage 190V, 380V
Rated output 1.5 to 750 kW
　 Standard Specifications Quasi-Standard Specifications
1 Ratings Number of polesOutput 6 (up to 90 kW for 190 V class)
)1.5 to 750 kW		 　
Voltage 190/380V 　
Rated base rotation speedTime rating 1,800 min-1(1,200 min-1: 750 kW only)
The constant output range is 1:1.33 relative to base rotation speed.
Continuous 		1,500 min-1/1,200 min-1
Please inquire about changes to rotation speed and rated output range.
2 Housing Protection IP44(fully-enclosed, splash-proof) IP55 (dust-proof, water jet proof)**
Cooling method IC416 (independent, externally mounted motorized fan to provide forced ventilation) IC411 (independent, externally mounted motorized fan to provide forced ventilation)
3 Insulation type F, H: 750 kW only 　
Temperature rise F type or B type rise
H type rise: 750 kW only
4 Usage environment Ambient temperature -10 to +40 °C +40 to +60 °C, -10 to -30 °C
Relative humidity
Elevation
Usage location		 95% RH
less1,000 m
lowerIndoors		 Higher than 95%
Higher than 1,000 m
Gas, vapors Indoor areas free from harmful corrosive and explosive gases or vapors Corrosion protection level C2, C3
5 Mounting method Horizontal installation, leg-mounted (B3)Geared motor1.5 to 55 kW Flange type, vertical
6 Coupling to load Directly-coupled/belt-driven (output for belt-driven coupling: max. 250 kW) 　
7 Vibration Peak-to-peak amplitudes: V30 or less Peak-to-peak amplitudes: V10 or less
8 Noise level Frame Size. .....................dB (A) 50/60 Hz
(no-load operation)
  90..................65/67 dB (A)
100..................69/69 dB (A)
112..................76/78 dB (A)
132..................75/78 dB (A)
160..................75/78 dB (A)
180..................77/80 dB (A)
200..................78/81 dB (A)
250..................82/85dB (A)
315..................91/92 dB (A)
400 .................. 89/93 dB (A)		 　
9 Starting torque 150% Greater then/less than 150%
10 Excess torque tolerance 150% for 1 minute Greater then/less than 150%
11 Accessories Electric cooling fan, Optocoder (600P/R)PTC thermistor element Reduction gear (geared) with brake (non-excitation-operated type), etc.High-resolution OptocoderDust-proof electric cooling fan (EDM13, 17 only)*NTC thermistor elementResolver Klixon thermal protector
12 Paint color Munsell: 7.5 BG4/1.5 　
13 Applicable standard JEC-2100 　

Set the inverter PWM carrier frequency to 6 kHz.
Please consult Toyo Denki if wishing to change the PWM carrier frequency to a value other than 6 kHz.

Output, Frame Size, Rated Current

Frame Size / Type
□□A/□□A
Current at 190 V and max. speed /Current at 190 V and base speed		 □□A/□□A
Current at 380 V and max. speed /Current at 380 V and base speed
  Standard Specifications Quasi-Standard Specifications
Constant output speed 2400 to 1800min-1 2000 to 1500min-1 1600 to 1200min-1
Constant torque range 1800 to 0min-1 1500 to 0min-1 1200 to 0min-1
Base speed 1800min-1 1500min-1 1200min-1
Rated output/rated voltage 190V 380V 190V 380V 190V 380V
1.5kW 90A　EDM1311V* 90A　EDM1311V 90A　EDM1311V
6.4A/6.7A 2.6A/3.3A 5.3A/6.1A 2.7A/3.0A 5.3A/6.2A 2.6A/3.1A
2.2kW 90A　EDM1311V* 90A　EDM1321V 90A　EDM1321V
7.6A/9.1A 3.8A/4.5A 7.7A/8.8A 3.8A/4.6A 7.7A/9.0A 3.8A/4.5A
3.7kW 90A　EDM1321V* 100A　EDM1711V 100A　EDM1711V
12.5A/15.9A 6.2A/7.9A 15.1A/13.5A 7.6A/6.7A 14.3A/13.6A 6.9A/6.7A
5.5kW 100A　EDM1711V 100A　EDM1711V 100B　EDM1721V
20.8A/19.8A 10.4A/9.9A 19.5A/20.0A 9.8A/9.9A 21.3A/19.4A 10.7A/9.7A
7.5kW 100A　EDM1711V 100B　EDM1721V 112A　EDM1921V
25.9A/27.2A 13.0A/13.5A 28.3A/26.3A 14.3A/13.1A 26.4A/27.0A 13.2A/13.6A
11kW 100B　EDM1721V 112A　EDM1921V 112B　EDM1931V
38.0A/39.4A 19.0A/19.6A 36.2A/42.2A 18.1A/21.1A 37.5A/41.0A 19.0A/20.1A
15kW 112A　EDM1921V 112B　EDM1931V 112B　EDM1931V
50.2A/60.8A 24.9A/27.5A 51.2A/53.6A 24.5A/29.6A 49.8A/56.4A 25.0A/27.9A
18.5kW 112B　EDM1931V 112B　EDM1931V 132A　EDM2221V
61.6A/68.4A 30.8A/34.0A 61.5A/67.2A 30.8A/36.8A 62.9A/65.9A 31.5A/32.8A
22kW 112B　EDM1931V 132A　EDM2221V 132B　EDM2231V
72.4A/81.7A 36.2A/40.6A 74.1A/79.4A 37.1A/39.5A 72.7A/80.9A 36.4A/40.3A
30kW 132A　EDM2221V 132B　EDM2231V 160A　EDM2761V
97.9A/114A 48.9A/56.8A 98.9A/110A 49.2A/54.5A 95.9A/117A 47.9A/58.2A
37kW 132B　EDM2231V 160A　EDM2761V 160A　EDM2761V
121A/134A 60.6A/66.8A 119A/146A 59.5A/68.4A 119A/143A 59.3A/71.2A
45kW 160A　EDM2761V 160A　EDM2761V 160A　EDM2771V
146A/164A 72.6A/81.9A 144A/175A 71.9A/83.5A 144A/169A 71.8A/84.1A
55kW 160A　EDM2761V 160A　EDM2771V 160B-2　EDM2781V
176A/202A 88.0A/101A 176A/202A 88.0A/101A 176A/198A 88.1A/98.7A
75kW 160B-1　EDM2772V 160B-2　EDM2781V 180A　EDM3141V
240A/270A 120A/135A 239A/280A 119A/140A 239A/269A 119A/134A
90kW 160B-2　EDM2781V 180A　EDM3141V 180B-1　EDM3151V
287A/325A 143A/162A 286A/322A 143A/161A 286A/340A 143A/177A
110kW 180A　EDM3141V 180B-1　EDM3151V 180B-2　EDM3161V
ー 175A/203A ー 174A/197A ー 174A/196A
132kW 180B-1　EDM3151V☆ 180B-2　EDM3161V 200A　EDM3541V
ー ー/253A ー 209A/240A ー 208A/235A
As above 200B　EDM3551V
ー 210A/238A
160kW 180B-2　EDM3161V☆ 200B　EDM3551V 200B　EDM3551V
ー ー/294A ー 258A/278A ー 252A/290A
As above 200B　EDM3561V
ー 253A/294A
200kW 200B　EDM3551V☆ 200B　EDM3561V 200B　EDM3561V
ー ー/366A ー 328A/336A ー 314A/367A
As above 250A-1　EDM4331V
ー 324A/335A
250kW 200B　EDM3561V☆ 250A-1　EDM4331V 250A-1　EDM4331V
ー ー/441A ー 393A/451A ー 392A/422A
315kW ー 315A-2　EDM5422V 315A-1　EDM5411V
ー ー ー 503A/581A ー 489A/598A
375kW 315A-2　EDM5412V* 315A-2　EDM5422V★ 315A-1　EDM5451V
ー ー/600A ー 590/688A ー 597A/652A
400kW ー ー 315A-1　EDM5451V
ー ー ー ー ー 631A/696A
450kW 315A-2　EDM5452V* 315A-2　EDM5462V★ 315A-2　EDM5462V★
ー ー/721A ー 700A/781A ー 701A/840A
750kW ー ー 400A　EDM6851V*
ー ー ー ー ー 1260A

Note 1) The EDM13 is also available with self-cooling. The self-cooling model is EDM13**F. In this case, the speed change range is 1:20, and the load must be reduced when running at low speed.
Note 2) Of rated outputs 357 kW, 450 kW, and 750 kW, those indicated with an asterisk (*) are only available with torque converter control. However, if the rated output of 750 kW is reduced to 700 kW, the motor can be used in the power conditioning range of 1,500 to 1,200 min-1. (700 kW, 1,500/1,200 min-1 1101/1170A)
Note 3) If using at rated output of 375 kW and at 1,600 to 1,200 min-1 with 1,200 min-1 torque converter control only, manufacture is also possible with frame size EDM5431V (593 A).
Note 4) The power conditioning range at rated output of 375 kW and 450 kW and base speed of 1,500 min-1 is 1,800 to 1,500 min-1. Furthermore, the power conditioning range at rated output of 450 kW and base speed of 1,200 min-1 is 1,500 to 1,200 min-1. (★ mark)
Note 5) Of rated outputs 132 kW, 160 kW, 200 kW, and 250 kW, those indicated with a star (☆) are only available with torque converter control. When power conditioning control is required, each frame size increases by one: 132 kW EDM3161V (211/247A), 160 kW EDM3551V (260/297A), 200 kW EDM3561V (321/353A), and 250 kW EDM4331V (395/480A).
Note 6) areas (frame size when using sensorless control at 132 to 200 kW, 1,200 min-1 base)

List of IP55 Compatible Models

Self cooling

　 Specifications
Constant output speed 2400 to 1800min-1 2000 to 1500min-1 1600 to 1200min-1
Constant torque range 1800 to 900min-1 1500 to 750min-1 1200 to 600min-1
Base speed 1800min-1 1500min-1 1200min-1
Rated output Type
30kW 　 　 EDM2761F
　 　 ■
37kW 　 EDM2761F EDM2761F
　 ■ ■
45kW EDM2761F EDM2761F EDM2771F
■ ■ ■
55kW EDM2761F EDM2771F EDM2781F
■ ■ ■
75kW EDM2772F EDM2781F EDM3141F
■ ■ ■
90kW EDM2781F EDM3141F EDM3151F
■ ■ ■
110kW EDM3141F EDM3151F EDM3161F
■ ■ ■
132kW EDM3151F EDM3161F EDM3541F
■ ■ ■
160kW EDM3161F EDM3551F EDM3551F
■ ■ ■
200kW EDM3551F EDM3561F EDM3561F
■ ■ ■
250kW EDM3561F EDM4331F EDM4331F
■ ■ ■
315kW 　 　 　
　 　 　
375kW 　 　 　
　 　 　
400kW 　 　 　
　 　 　
450kW 　 　 　
　 　 　
750kW 　 　 　
　 　 　

■：Supported models

Forced ventilation

　 Specifications
Constant output speed 2400 to 1800min-1 2000 to 1500min-1 1600 to 1200min-1
Constant torque range 1800 to 0min-1 1500 to 0min-1 1200 to 0min-1
Base speed 1800min-1 1500min-1 1200min-1
Rated output Type
30kW 　 　 EDM2761V
　 　 ■
37kW 　 EDM2761V EDM2761V
　 ■ ■
45kW EDM2761V EDM2761V EDM2771V
■ ■ ■
55kW EDM2761V EDM2771V EDM2781V
■ ■ ■
75kW EDM2772V EDM2781V EDM3141V
■ ■ ■
90kW EDM2781V EDM3141V EDM3151V
■ ■ ■
110kW EDM3141V EDM3151V EDM3161V
■ ■ ■
132kW EDM3151V EDM3161V EDM3541V
■ ■ ■
160kW EDM3161V EDM3551V EDM3551V
■ ■ ■
200kW EDM3551V EDM3561V EDM3561V
■ ■ ■
250kW EDM3561V EDM4331V EDM4331V
■ ■ ■
315kW 　 EDM5422V EDM5411V
　 ■ ■
375kW EDM5412V EDM5422V EDM5451V
■ ■ ■
400kW 　 　 EDM5451V
　 　 ■
450kW EDM5452V EDM5462V EDM5462V
■ ■ ■
750kW 　 　 EDM6851V
　 　 ■

■：Supported models

Product Inquiries

Click here for e-mail form