Event Recorder/Remote Monitoring System

• Event Recorder
• Remote Monitoring System

Event Recorder

The event recorder continuously records the train speed, running position, as well as on-board driving conditions such as the powering notch and brake operation.
It is compatible with "devices for recording on-board driving conditions" stipulated in the "Ministerial Ordinance Providing for Technical Standards on Railways".

Standard specifications

Power supply	DC24V, DC100V
Power consumption	5 W or less
Recording media	CF card (256 MB to 512 MB)
Recording interval	200 msec
Recording time	Approx. 270 hours (with 256 MB CF card)Following which oldest data is overwritten.
Recorded data	Time (with time correction using GPS) Speed (obtained from speedometer generator) Digital signals/analog signalsSerial signals (RS-485, RS-232C) (Analog signals and serial signals are optional)

Features

• On-board driving conditions are recorded on large-capacity storage media (CF card), and can be displayed and analyzed using dedicated analysis software.
• It can also be used to ascertain on-board driving conditions when failure occurs during train operation.

Remote Monitoring System

Using general-purpose communication lines such as 5G networks, operating data for applicable devices is stored on a cloud server.
Data in the cloud can be viewed from anywhere with an Internet connection.

Features

• By incorporating a remote monitoring terminal into the VVVF inverter and auxiliary power supply, a train condition monitoring system can be constructed without using a train control management system.
• Can even be added to existing equipment.
• Data can be viewed on a PC, tablet, or smartphone via access a browser.