The VF64R regenerative converter further advances the VF61R, with consideration for the power supply environment, options for system upgrades, and open network support.
Customers can choose either PWM sine wave converter mode or 120-degree electric current mode (regeneration function only), whichever is best suited to the installation environment.
The HC function implements high-speed operations by combining approximately 30 super blocks that use a high-speed CPU for high-precision, high-response control of motor drive. The sequence function enables the building of approximately 100-step ladder programs within the inverter. Design/adjustment using PC tools is also supported.
A variety of open networks are supported by using optional cards, allowing the construction of networks with a variety of devices, including those that output commands to converters and those that monitor converter status.
* See here (Toyo Network System)
|Capacity||200 V class: 75 to 180 kW 400 V class: 75 to 1,000 kW|
|Supply voltage||3-phase 3-wire 200 V class: 200 to 230 V ±10% 50/60 Hz ±5% 400 V class: 380 to 460 V ±10% 50/60 Hz ±5%|
|Input power rate||99% or more (at 100% load) 95% or more (at 30% load or more)|
|High frequency percentage||5% or less (at 100% load)|
|DC output voltage||200 V class: 312 to 58 V 400 V class: 600 to 716 V|
|Overload capacity||150% for 1 minute|
|Network||OPCN-1,RS422 / 485,RS232C|