|
| |
| Sine Wave Converter VF64R/VF61R |
| Total current distortion not
higher than 5% at rated load. Corresponding to the harmonic
restraint guidelines. Since the high power factor is 99% or
higher (at rated load), the power capacity can be greatly reduced.
Since 100% continuous regeneration is possible, the braking
capability of the AC drive is greatly improved. |
| Performance/function |
200V series |
400V series |
| Supply voltage |
Three-phase three-wire
200～230V 50/60Hz |
Three-phase three-wire
380～460V 50/60Hz |
| Output voltage*1 |
312～358V |
600～716V |
| Applicable inverter capacity (kW) |
75, 90, 150, 180 |
75, 110, 160, 200, 250, 315, 400, 500, 600, 750, 1000 |
| Harmonic content (current) |
5% or less (at 100% load) |
| Input power factor*2 |
99% or higher (at 100% load) |
| Overload capacity |
Operating state of rated current
150% continuously for 1 minute |
| Protective structure (JEM1030) |
IP00 (open type) |
| Protective function |
FUSE brake, AC overcurrent, AC overload, DC part over voltage, Fin overheat, IGBT power source abnormal, memory abnormal,
Option abnormal, Start stall, External failure, Under voltage, Communication abnormal |
| Input signal |
Operation, fault reset, external
fault |
| Output signal |
RUN, Protect, Possible to run Inverter, MC-ON, multi-function analog
meter output |
| Ambient conditions |
Ambient temperature 0 to 50°C
Humidity 90%RH or lower (no dewing condensation)
Storage temperature -20 to 60°C (temperature range applicable
in a short time during transportation, etc.) |
| (*1) |
Output voltage cannot be lowered Supply voltage ×1.56 |
| (*2) |
Non-changable |
| Total current distortion not
higher than 5% at rated load. Corresponding to the harmonic
restraint guidelines. Since the high power factor is 99% or
higher (at rated load), the power capacity can be greatly reduced.
Since 100% continuous regeneration is possible, the braking
capability of the AC drive is greatly improved. |
| Performance/function |
200V series |
400V series |
| Supply voltage |
Three-phase three-wire
200～230V 50/60Hz |
Three-phase three-wire
380～460V 50/60Hz |
| Output voltage*1 |
320～358V |
640～716V |
| Applicable inverter capacity (kW) |
11, 15, 22, 30, 37, 45, 55 |
11, 15, 22, 30, 37, 45, 55 |
| Harmonic content (current) |
5% or less (at 100% load) |
| Input power factor |
99% or higher (at 100% load),
95% or higher (at load of 30% or more) |
| Overload capacity |
Operating state of rated current
150% continuously for 1 minute |
| Protective structure (JEM1030) |
IP00 (open type) |
| Protective function |
DC overvoltage, instantaneous
overcurrent, overload, overheating, power element abnormality,
AC/DC fuse blown |
| Input signal |
Operation, fault reset, external
fault |
| Output signal |
Operation, fault reset, inverter
operation permission (1c relay contact), multi-function analog
meter output |
| Ambient conditions |
Ambient temperature 0 to 50°C
Humidity 90%RH or lower (no dewing condensation)
Storage temperature -20 to 60°C (temperature range applicable
in a short time during transportation, etc.) |
| (*1) |
Output voltage cannot be lowered Supply voltage ×1.56 |
|
|
